Print this page

TRIUMPH 2000... Mk1 2.7cc with EFI…190 hp...Track Day Project Featured

March 1998…this  TRIUMPH is now FOR SALE…
 
It previously was the Personal Track Day car of Charles Harris, who owned and operated British Auto Care in Brisbane….
It’s Suitable for…Short Circuit, Hill Climb, Track Days, Rally and or Fast Road use.
 
image.tiff
 
Some of the Car's features, 
 
The 2.5cc 6 cylinder engine is now 2.7cc with Mazda Pistons, Steel Crank, Roller tipped Rockers, Baffled Sump, Vernier Timing Gear,
 
Lightened Flywheel, previously quoted at 190 hp with EFI….Ceramic Coated Extractors, with 2.25 inch stainless exhaust system,
 
Race type Clutch with Kevlar Linings, Twin Thermo Fans and an Oil Cooler with Thermostat…the list goes on…
 
P1130334.jpeg
  • Sprint Close Ratio gearbox with A-Type O/D…connects  to a larger 3 inch Tail shaft which  is CV Jointed, this connects to a strengthened 
  • rear cross member diff input housing, then to  a QUAIFE LSD with 4.33 Gears driving Datsun Axles with BAC Tridat Uni-Joints.
  •  
  • It has a Tandem Power Boosted Master Cylinder with Austin Princess 4 Spot callipers on the front and the larger Stag Drums on the back.
  • Power Steering is fitted with Twin Anti Roll bars on front, Timken Roller Bearing strut top mounts. Lower Stiff Springs front and rear, 
  • Koni Shocks all around and Mk2 Trailing Arms giving wider track. 4 Point Racing Harness with Qld Transport Approved Race Bucket Seat…..
  • and a Radio/stereo system…..and a Dolly Sprint front Spoiler.
When I bought this car it was a non runner, it was in the process of being updated with a Brand New computer to run the connections of  the previous EFI system, this has still to be fitted, so the car is as I bought it, it's  a non runner….if EFI is not your preference then 
the original PI system is included….The Great Basics are all there, but the whole car needs a complete recommissioning….it’s a project.
This car is not a "show-pony’…it’s Purpose is Motor Sport
 
The Other Parts in the pic that also come with the sale…
  • Including those on the car there are 10 identical Mag Wheels 5 for road tyres and 5 for race/rally. 
  • A full set of 2500S velour seats, should you just want to road it some times.
  • Two additional Full Harness seat belts and full set of standard steel wheels
  • Replacement front door for damaged passengers side door.
  • Also included is a set of Qld Personalised Plates with TSOAQ  labelling and reading….“ MYP10 “
I always intended to get this car running for some fun motor sport, however life had other plans, NOW health issues prompt a sale.
 
I’m now looking to find someone to take up my stalled project…
 
Please see more pictures in the gallery (click Read more.... to lower right side).
 
I took the last 2 pictures of Charles in action, when the car came up for sale I just had to buy it….
NOW it’s someone's opportunity to take up the dream….the Motor Sport Experience..
Asking $5000….all offers considered…all the Best with your new project.
The cars running gear and parts alone are worth a lot more than my asking price, in Charles’ words, when I bought it from him, 
"you’d need $15 to $20K to replicate this car".…who knows how much today.. many more $$$’s ….so do your sum$.
 
Please Contact…Gary Martin
Email…. This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone.. 07 5522 7469

Additional Info

  • Contact Name: Gary
  • Phone: 07 5522 7469
  • Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Price: $5000
  • Condition: Used
Read 11 times