Expression of interest sort…for Potential Sale.
This was previously the Personal Track Day car of Charles Harris,
who owned and operated British Auto Care in Brisbane….
It’s Suitable for…Short Circuit, Hill Climb, Track Days, Rally and or Fast Road use.
Some of the Car's features,
The 2.5cc 6 cylinder engine is now 2.7cc with Mazda Pistons, Steel Crank, Roller tipped Rockers, confused Sump,
Vernier Timing Gear, Lightened Flywheel, previously quoted at 190 hp with EFI….Ceramic Coated Extractors,
with 2.25 inch stainless exhaust system, Race type Clutch with Kevlar Linings,
Twin Thermo Fans and an Oil Cooler with Thermostat…the list goes on…
Sprint Close Ratio gearbox with A-Type O/D…connects to a larger 3 inch Tail shaft which is CV Jointed,
this connects to a strengthened cross member input housing then to a QUAIFE LSD with 4.33 Gears driving
Datsun Axles with BAC Tridat Uni-Joints.
It has a Tandem Power Boosted Master Cylinder with Austin Princess 4 Spot callipers on the front and
the larger Stag Drums on the back.
Power Steering is fitted with Twin Anti Roll bars on front, Timken Roller Bearing strut top mounts.
Lower Stiff Springs, Koni Shocks all around and Mk2 Trailing Arms giving wider track.
4 Point Racing Harness with Qld Transport Approved Race Bucket Seat…..
and a Radio/stereo system.
When I bought this car it was a non runner, it was in the process of being updated with
a Brand New computer to run the connections of the previous EFI system,
this has still to be fitted, so the car is as I bought it, it's a non runner….
The Basics are all there but the whole car needs a complete recommissioning.
This car is not a "show-pony’…it’s Purpose is Motor Sport…
https://www.tsoaq.org.au/index.php/events/past-events/motor-sport/219-motor-sport
The Other Parts in the pic also come with the sale…
Including those on the car there are 10 identical Mag Wheels 5 for road tyres and 5 for race,
A full set on 2500S velour seats, should you just want to road it some times.
Two additional Full Harness seat belts and full set of standard steel wheels..
Replacement front door for damaged passengers side door.
Also included is a set of Personalised Plates with TSOAQ labelling….“ MYP10 “
I always intended to get this car going for some fun motor sport, however life had other plans.
I’m now looking to find someone to take up my stalled project….
I’ll consider all offers above $5000 …
The cars running gear and parts alone are worth a lot more than that,
in Charles’ words, when I bought it, you’d need $15 to $20K to replicate this car.….
I took the last 2 pictures of Charles in action, when the car came up for sale I just had to buy it….
NOW it’s someone's opportunity to take up the dream….the Motor Sport Experience..
Please Contact…Gary Martin
Email…. This email address is being protected from spambots. You need JavaScript enabled to view it. or Phone.. 07 5522 7469
